Mudanjiang North Alloy Tools Co., Ltd.
Pursue Excellent, Accelerate Development
Add to Cart
Introduction of Tungsten Alloy billet for dart
Billets are actually tungsten cylinder rods after surface grinding by center-less processing, and their weights are varied from different tungsten contents and rod sizes.
Usually we provide products according to clients' specific demands. We can also offer a range of different tungsten alloys, including W-Ni-Fe, W-Ni-Cu or W-Ni-Cu-Fe, up to the particular requirement for that high-density alloy. Surface center-less ground can be done upon demand.
Our advanced technology can make tungsten billet at economic cost. Size can freely follow customer's request. We can control the density from 16-18g / cm3.
By this you can design your product accurately.
E: elva(at)northtungsten(dot)com
| Tungsten Dart Specification [Ø(+0.05)×(+1.0)mm] | Content W % | |||||||
| 65 | 70 | 80 | 85 | 90 | 95 | |||
| (+/-0.25g/cc) Density | ||||||||
| 13.20 | 13.90 | 15.40 | 16.00 | 16.90 | 18.00 | |||
NO. | nch | mm | (+/-0.50g/pc) Weight | |||||
| 1 | Ø1/4×1.7 | Ø6.35×43.2 | ||||||
| 2 | Ø1/4×1.8 | Ø6.35×45.7 | ||||||
| 3 | Ø1/4×1.9 | Ø6.35×48.3 | ||||||
| 4 | Ø1/4×2.00 | Ø6.35×50.8 | ||||||
| 5 | Ø1/4×2.15 | Ø6.35×54.6 | ||||||
| 6 | Ø0.265×1.7 | Ø6.73×43.2 | ||||||
| 7 | Ø0.265×1.8 | Ø6.73×45.7 | ||||||
| 8 | Ø0.265×1.9 | Ø6.73×48.3 | ||||||
| 9 | Ø0.265×2.00 | Ø6.73×50.8 | ||||||
| 10 | Ø0.265×2.15 | Ø6.73×54.6 | ||||||
| 11 | Ø9/32×1.6 | Ø7.15×40.7 | ||||||
| 12 | Ø9/32×1.7 | Ø7.15×43.2 | ||||||
| 13 | Ø9/32×1.8 | Ø7.15×45.7 | ||||||
| 14 | Ø9/32×1.9 | Ø7.15×48.3 | ||||||
| 15 | Ø9/32×2.00 | Ø7.15×50.8 | ||||||
| 16 | Ø9/32×2.15 | Ø7.15×54.6 | ||||||
| 17 | Ø5/16×1.6 | Ø7.94×40.7 | ||||||
| 18 | Ø5/16×1.7 | Ø7.94×43.2 | ||||||
| 19 | Ø5/16×1.8 | Ø7.94×45.7 | ||||||
| 20 | Ø5/16×1.9 | Ø7.94×48.3 | ||||||
| 21 | Ø5/16×2.00 | Ø7.94×50.8 | ||||||
| 22 | Ø11/32×1.4 | Ø8.74×35.6 | ||||||
| 23 | Ø11/32×1.6 | Ø8.74×40.7 | ||||||
| 24 | Ø11/32×1.8 | Ø8.74×45.7 | ||||||
| 25 | Ø11/32×2.00 | Ø8.74×50.8 | ||||||